線束工程師 工作內容: 1. Wire harness routing work and bracket/cable channel design if needed 2. check PDM and BOM 3. DMU controller 1. 進行線束布線工作,必要時進行支架/線纜通道設計。 2. 檢查產品數據管理系統(PDM)和物料清單(BOM)。 3. 數字樣機(DMU)控制。
(注:PDM為Product Data Management的縮寫,BOM為Bill of Materials的縮寫,DMU為Digital Mock-Up的縮寫,均為行業常用術語,此處保留標準譯法) 任職要求: 1.Knowledge of automotive electronic systems and more than 5 years experience of wire harness development in PHEV/EREV/fuel vehicles ; 2. Familiar with Catia V5 1. 了解汽車電子系統,且在插電式混合動力汽車(PHEV)/增程式電動汽車(EREV)/燃油汽車領域擁有5年以上線束開發經驗。 2.熟練使用CATIA
MB SIM Technology Co., Ltd. which is locatedin Shanghai, P.R.China is a joint venturecompany of MBtech Group. The MBtechGroup is a wohlly-owned subsidiary ofDaimler Group and a globally active.internationally leading automotiveengineering and consulting companyMBtech develops, integrates, and testscomponents, systems, modules and vehiclesworldwide.In addition to the headquarter inGermany, the MBtech Group is representedatlocations in Europe, North America andAsia. Combined with the service segmentsand expertise from global MBtech Group, theMB SIM Technology Co., Ltd.is offeringdedicated and market oriented vehicleengineering,powertrain solutions.electronics solutions and consulting servicesalong the entire value creation chain withlocal resources to customers in China andother Asian countries for their localizatiorand adaptation.