崗位職責：
1. Lead the cause analysis and improvement of the yield/efficiency abnormality of the station to reach the KPI target;
1.主導本工位的良率/效率異常的原因分析和改善，達到KPI目標;
2. Take the lead in dealing with the production line abnormalities. If they can't deal with them in time, they will send them to the manager and team for negotiation
2.主導對產線異常處理，處理不了及時highlihgt給經理和team協商解決.
3. Leading station parameter setting/programming tool optimization/process selection/production line sample board/productivity optimization/production line yield improvement/process and equipment research, and DOE testing for tracking, data collection, analysis and feedback.
3.主導工位參數設定/程序編寫工具優化/工藝選擇/產線樣品板/產能優化/產線良率改善/制程及設備研究,DOE測試進行跟蹤與收集數據分析和反饋。
4. Write and update work instructions (including maintenance);
4.撰寫和更新工位作業指導書（含保養）等;
5. Equipment incoming inspection, installation, calibration and measurement equipment CPK&GRG, fault repair support and maintenance;
5.設備進貨檢驗、安裝校準測量設備CPK&GRG、故障維修支持、維護;
6. Assist in the evaluation of new process and new equipment at the station;
6.協助新制程及工位新設備的評估;
7. Product failure analysis, analyze the quality problems in each stage (trial production, mass production, market feedback), and provide analysis plans;
7.產品失效分析，對各個階段（試產,量產,市場反饋）的質量問題進行分析，給出分析方案;
8. Simulation and optimization of leading station CT and cost assessment
8.主導工位CT及成本評估的模擬及優化
9. Assist PDE in identifying and solving risks such as design/material/process of new products at NPI stage
9.協助PDE在NPI階段對新產品的設計/材料/工藝等風險識別并解決
10. LQ related data shall be reviewed and submitted to the team to ensure that the station can meet the needs of LQ smoothly.
10.LQ相關資料審核并提交給Team及確保工位順暢滿足LQ的需求。
11. Report to the engineering manager and complete the tasks assigned by the manager
11.匯報給工程經理并完成經理分配的任務.
崗位要求：
1. Bachelor degree or above;
1.本科及以上學歷;
2. Fluent in English reading and writing;
2.英文讀寫流利;
3. Master SMT assembly process and FPC process specification;
3.精通SMT組裝工藝，了解FPC工藝規范;
4. Understand relevant knowledge of process materials and reliability failure analysis;
4.了解工藝材料及可靠性失效分析相關知識;
5. Skilled equipment maintenance and programming ability, including printing machine (DEK, MPM)/mounting machine (YAMAHA series, Panasonic series)/reflow machine (BTU/VITRONICS/ERSA)/automatic dispensing machine;
5.熟練的設備維護和編程能力,包含印刷機(DEK,MPM)/貼片機(YAMAHA系列,松下系列)/回流機(BTU/VITRONICS/ERSA)/自動點膠機;
6. Be familiar with SMT manufacturing process, be able to analyze product defects and propose improvement methods according to equipment and fixture capabilities;
6.熟悉SMT制造工藝,能根據設備,夾具能力分析產品 缺陷并提出改善方法;
7. Master and use DOE;
7.掌握并使用DOE;
8. Quality improvement process and data analysis methods (such as seven QC techniques, DFMEA, PFMEA, CP, QCC, 6Sigma, etc.);
8.質量改善流程與數據分析方法（如QC七大手法，DFMEA 、PFMEA、CP、QCC、6Sigma等);
9. Understand the R&D project management including EI/ESI, NPI/TPI, and product import related processes and input and output components;
9.了解研發項目管理含 EI/ESI、NPI/TPI、及產品導入相關流程和輸入輸出件;
10. Master FMEA and Control Plan;
10.掌握 FMEA, Control Plan;
11. Understand 6 Sigma and lean production;
11.了解6西格瑪，精益生產;
12. Be familiar with SPC, MSA and other statistical control methods;
12.熟悉SPC,MSA等統計控制方法;
13. Understand ISO 9000, TS16949, ISO 14000, QC080000;
13.了解ISO 9000, TS16949, ISO 14000,QC080000;
14. SMT related work experience of more than 5 years, and SMT equipment experience of more than 3 years
14.SMT相關工作經驗5年以上，3年以上SMT設備經驗.